The Next Generation of Electronic Pool Testing Has Arrived
Test equipment for the responsible private swimming pool and whirlpool operator
- Modern, ergonomic design
- User friendly Handling
- Watertight housing*
- Large display
*as defined in IP 68, 1 hour at 0.1 meter
- Scuba II in a robust plastic box
- Tablet reagents
each 20 DPD No.1 & Phenol Red Photometer
each 10 DPD No.3, CyA-Test & Alka-M-Photometer
- 2 batteries (AAA)
- Stirring rod
- Instruction manual
Order Code: 21 61 00
Every pool owner should check the most important parameters in his pool at regular intervals. This is the only way to ensure that water quality is maintained at an right level and to arrange dosing in an optimum manner. The Scuba II enables the operator to check the pool water quickly and accurately. The integra- ted sample chamber filled by immersing it in the water. A tablet reagent is added and generates a characteristic colour which can be measured using the photometric principle. The result is then displayed on the screen. Five parameters, free chlorine, total chlorine, pH, alkalinity and stabilizer (cyanuric acid)are measured within a few minutes. Water analysis becomes a pleasure rather than a chore and more time is left for enjoying the pleasure of the pool. If the Scuba II falls into the water it will simply float and, of course, it is watertight. Why not try this compact test equipment – after all, the knowledge that you are safe in a thoroughly hygienic pool is worth a little effort.
(λ = 530 nm) and photo-sensor
|Power supply||2 batteries (AAA), capacity minimum 500 tests|
|Auto-Off||automatic switch-off approx. 5 minutes after last key press|
(L x W x H)
|145 x 70 x 45 mm|
|Weight||ca. 165 g (incl. batteries)|
||temperature: 5 – 40°C relative humidity: 30 – 90%, non-condensing|
|Chlorine, free||0.1 - 6 mg/l Cl2||0.1 mg/l||0 – 1 mg/l ± 0.1 mg/l; 1 – 2 mg/l ± 0.2 mg/l
2 – 3 mg/l ± 0.4 mg/l ; 3 – 6 mg/l ± 0.5 mg/l
|Chlorine, total||0.1 - 6 mg/l Cl2||0.1 mg/l||0 – 1 mg/l ± 0.1 mg/l; 1 – 2 mg/l ± 0.2mg/l
2 – 3 mg/l ± 0.4 mg/l; 3 – 6 mg/l ± 0.5 mg/l
|pH Value||6.5 - 8.4 pH||0.1 pH||± 0.2 pH|
Stabilizer (cyanuric acid)
|1 – 160 mg/l||1.0 mg/l||1 – 50 mg/l ± 10 mg/l; 50 – 160 mg/l ± 20 mg/l|
|0 – 300 mg/l CaCO3||1.0 mg/l||± 50 mg/l|
Pool Water TestingBy: Paul on 16 January 2015Have recently received the Scuba II water quality test meter and have used it over the last week or so. The tester is easy to use if you follow the instructions carefully for the first few times, after that you get the hang of how the system works. It is a little fiddly having to do multiple tests if you want values for each of the parameters. That said, it is only really necessary to test free chlorine on a regular basis. It is great to have a test kit like this at hand, ensuring that your water quality information is accurate and precise. No more interpretation of colour test strips etc. It has given me more confidence in ensuring our pool water quality is where it needs to be. I'm sure there is other testing equipment out there that could be a little less fiddly to use, but this one is good value for money.
Great solution11 September 2014Easy to use. Accurate readings. Made my life easier.
Cheap, Simple and Easy to useBy: Martin on 11 March 2014We are using the Scuba II to check Chlorine daily. It is easy to use and also easy to teach the staff the correct functions. We are only using it check Chlorine and PH against an installed Chemigen unit. The readings are easy to record and the tests simple enough to repeat as often as necessary.
Fantastic TesterBy: Brad Tarr on 29 December 2013What a great find. Have been looking for a easy tester for some time... and this is perfect. Easy to use, accurate readings. Makes life much easier when not close to a pool shop for testing.